Have you bought a new Sharp TV and are looking for guidelines for setting it up? This section is for you. The process involves selecting a system language, connecting to the Internet, account sign-in, input configuration, and more. As Sharp TVs run on various operating systems, the procedure to set it up will vary accordingly. In this guide, we will show you how to setup a Sharp TV with screenshots.
Things to Do Before You Set Up Sharp TV for the First Time
Before we start with the setup process, there are a few things you must remember to do if you are setting up the Sharp TV for the first time. Those who did a factory reset on Sharp TV can skip this section and start with the setup.
- Unbox your Sharp TV and follow the user guide to place or mount it securely.
- Ensure you have the necessary HDMI and Ethernet cables to connect your other TV accessories, devices, and the internet.
- Connect your Sharp TV to WiFi, which should be stable and robust.
How to Setup Sharp Android TV
1. Switch on your Sharp TV once you connect it to a stable power source.
2. On the Welcome page, select the Language of your preference.
3. Click Continue to set up your Sharp TV using an Android phone. If not, click the Skip option.
4. Next, choose your home WiFi network from the list of internet networks displayed on the screen.
5. Enter your network password to connect the Sharp TV to WiFi.
6. Tap on Accept when the Terms of Service page appears to continue.
7. Turn on the Location setting by pressing the Yes option. Press either Yes or No when the Help Improve Android page appears.
8. After that, you will be presented with a guide on the features of the Sharp TV. Press the Right Arrow on your remote to proceed with the setup.
9. Choose your Country and press OK to create a new Security PIN for your Sharp TV. After you have entered the new PIN, press OK and repeat the same process to confirm the PIN.
10. Select Home as your TV mode and press Yes to confirm your action.
Note: If you select Store as your Sharp TV mode, follow the on-screen prompts to complete the process.
11. Enable the Chromecast feature by selecting the On option.
12. Next, you will be presented with three different tuner modes. Select Antenna, Cable, or Satellite, whichever works for you.
13. The next page will present options for scanning for channels.
- If you press Yes, your Sharp TV will scan for the available channels.
- If you press No, you can always use the Menu option to scan them when needed.
14. Press Finish. Your Sharp TV will search for accessories to connect to. If you have other devices in the pairing mode, your Sharp TV will detect them, and you can connect.
15. Press the Back button on your remote if you wish to do the pairing later.
That’s it. You have successfully finished setting up your Sharp Android TV.
How to Setup Sharp Roku TV
Setting up Sharp Roku TV is easier than other models
1. On the Let’s Get Started screen, pick a Language of your preference.
2. Choose Set up for home use to use Sharp TV for personal usage. If not, choose the Set up for store use option.
3. Your Sharp TV will automatically start scanning for WiFi networks. Choose your home network from the list displayed, enter your password, and press Connect.
4. After that, your Sharp TV will indicate if a software update is available. Press OK, and the Sharp TV will automatically update and restart.
5. Once the TV restarts, you will get the activation page. Using your PC, tablet, or smartphone, open the roku.com/link website and enter the code shown on your Roku TV screen in the given space.
Note: Provide your Roku credentials if prompted to activate your Sharp Roku TV. If you are a new user, you can create an account through their official website.
6. Once it is activated, the channels will be updated, and you can connect your other external devices to the TV. You can also choose to do that later if you wish to.
7. After that, you can view an introduction video, which you can skip by pressing the Back or Home button on your remote.
You can use your Sharp TV and its settings normally when the video ends. Customize them as you see fit and add channels you like without any problem.
How to Setup Sharp Google TV
If you have a Sharp Google TV, you can set up your TV in a matter of minutes with these steps. Ensure your Sharp Google TV has a proper power supply and turn it on.
1. On the Welcome page, use your remote to select your preferred language.
2. Following that, you will be presented with the option Set Up Google TV or Set Up Basic TV. We suggest you go with Google TV.
Note: The difference between the Set Up Google TV and Set Up Basic TV: For the former, you must sign in to your Google account, which will give you access to all the features of Sharp Google TV. The latter option will not ask for any sign-in, but you will miss out on most of the TV’s features.
3. Next, you will be directed to pick a WiFi network from the list of networks detected by your TV.
4. Click on your home network and use your password to connect the Sharp Smart TV to your WiFi.
5. If a software update is available, you can see the Download and Update option. Select the Download in the background option to set up your TV while it updates.
6. Sign in to the Google Account using valid credentials and select Continue on the Google Assistant screen.
Note: You can click the Turn On option to enable the Google Assistant or press No Thanks to continue with the setup.
7. Choose the apps you wish to install and press Confirm. The apps will be automatically added to your TV after the initial setup.
8. Next, choose either Home or Store based on where you are using your TV. Continue to set the Time Zone and press the Log In button.
9. Agree to the User Agreements and press Allow if you wish to keep the TV updated at all times.
10. Then, click the Home and OK buttons on your remote.
That’s it. The setup process is over. You can continue to customize settings as you like and stream your favorite content on the TV.
How to Setup Sharp Aquos TV
Setting up the Sharp Aquos TV is comparatively easier and simpler than the other versions and models. Turn on your Sharp TV and continue with the given instructions.
1. Choose the Language of your choice from the list of options given.
2. Choose your Country and connect your Sharp Smart TV to the WiFi. If you use an Ethernet cable, the TV will automatically detect the connection. Just press OK to connect to it.
3. Press the Use Wireless Network button and follow the on-screen prompts to connect to your WiFi wirelessly.
4. In the Environment page, choose Home Mode or Store Mode.
5. On the next page, choose how you have positioned your TV. Choose if it is Desktop or Wall-mount.
6. After that, choose an Input Source from the options displayed on the screen.
7. Once the installation is over, click the Auto Tuning option to tune your channels and follow the on-screen instructions to complete the process.
FAQ
If your Sharp TV remote isn’t working, you can use the physical buttons at the back or bottom of your TV to complete the setup.
To set up a channel on Sharp TV, press the Menu button on the remote. Go to Settings, choose Channel, and select the Auto Channel Scan option. It will automatically scan for channels and will appear on your Aquos TV.
