If your Sharp TV remote is not working, the first thought that comes to your mind is to change its batteries. But if the batteries have sufficient charge, you may wonder what the reason could be. Problems with the remote are common in all TV brands, and Sharp is no exception. This guide explains why remote issues are occurring and what you must do to fix them.
Causes for Sharp TV Remote Not Working
The reasons your TV remote does not work might depend on hardware or software problems.
| Issues | Quick Solutions |
|---|---|
| Weak or drained batteries | Insert new batteries into the remote |
| Faulty infrared sensor | Test IR signals on the remote |
| Remote refuses to pair with the TV | Power cycle the TV and the remote |
| Technical glitches in the firmware | Restart the Sharp TV Update the Sharp TV software |
| Signal interference by external objects | Clear the obstructions in a line of path |
| Particular remote buttons are malfunctioning | Disassemble the remote and clean it |
How to Fix Sharp TV Remote Not Working Issue
Follow the troubleshooting techniques chronologically to avoid first trying hard solutions.
Replace Batteries on TV Remote
Sometimes, a dead battery on your Sharp TV remote might be the reason it doesn’t work. So get an AA or AAA-size battery that suits your TV remote and insert it properly. Now, your TV remote will be working as new. If the remote still has a problem functioning, follow the next fix.
Power Cycle the Sharp TV
Sometimes, a technical glitch or bug files on your Sharp TV might cause problems with receiving the remote signals. These temporary files can also cause various issues on your Sharp TV. However, a simple Sharp TV reboot will solve this issue and make your remote work as it was before.
Clear the Obstructions
If you try to operate the Sharp TV remote from a longer distance, it will likely not respond due to range. So, reduce the distance between your TV and the remote. In addition, check if any interference appears in a direct line of sight, as it may block the signals from reaching the TV sensor.
Clean the TV Remote
If you binge-watch TV series while eating, the smudges, dust, and debris may stick to your TV remote as sediment. So, take a warm or dry cloth and clean the Sharp TV remote properly. You can even use rubbing alcohol or microfibre cloth to clean the debris on the remote. Now, check whether the remote is working or not.
Inspect the Remote’s IR Sensor
If your Sharp TV remote emits IR signals, check whether its IR sensor is working. Your IR sensor might stop working due to prolonged usage or physical damage.
1. Take your smartphone and run the camera app.
2. Now, face the IR sensor of your Sharp TV remote towards the camera lens.
3. Press any buttons on the TV remote.
4. If any buttons light up on the IR sensor, your remote’s IR emitter is working well.
5. If you can’t see the flashlight, the remote’s IR emitter has a problem.
Note: Some camera lenses have an IR filter that prevents you from capturing IR signals. So don’t replace your TV remote immediately without trying from another phone.
Reset the Sharp TV Remote
Like the TV device, your TV remote is also susceptible to bugs in its chipset. Sometimes, the codes enlisted on the chipset might not run due to some problem. So, by resetting the Sharp TV remote, you can fix these kinds of issues.
1. Remove the battery case and the batteries from your TV remote.
2. Now, press and hold the Power button on the TV remote for 30 seconds.
3. Next, press every single button of your TV remote once.
4. Now, insert the batteries on your TV remote and check whether it is working normally or not.
Re-pair the Sharp TV Remote
Some Sharp TV remotes work only after pairing with the TV. Make sure to program the Sharp TV remote with your TV and check if it is working again. If your Sharp TV remote emits IR signals, you don’t need to pair it like a Bluetooth remote. You can start using an IR-based remote when you insert batteries into it.
Get Assistance via Customer Support
Even after trying all the troubleshooting, if you’re in the same position and can’t go on, contact technical support for help. You can contact Sharp TV customer support by visiting its official website or calling the service toll-free number. If you don’t need customer support and are looking for a remote alternative, refer to the next section.
| Customer Support Page | https://getsupport.sharpusa.com/ |
| Customer Support Toll-free Number | 1-800-237-4277 |
Try the Remote Alternatives
There are other possibilities with which you can control your Sharp TV if your TV remote isn’t working.
Remote Apps
If your TV remote is completely damaged, you can use a Sharp TV remote control app on your smartphone to control your TV without a remote. However, there is no official remote app available for Sharp TV models. Sharp Android, Google, and Roku TV users can install their own official remote apps to control their TVs.
IR Remote Apps
If you own a Sharp Aquos TV or an old Sharp TV model, you can install an IR remote app to control your TV without any issues. Since the IR remote works on infrared signals, it is very easy to pair and control your TV instead of using WIFI remote apps.
Note: To make the IR remote app work, your smartphone must have an in-built IR sensor.
Go for a Universal Remote
Have you finally decided to replace your broken TV remote with a new one? Then hold that thought and give Universal Remote a chance. It is an alternative remote control that works on various streaming devices like TVs, speakers, set-top boxes, and many more. You can program a universal remote and control it easily after programming it with Sharp TV remote codes.
FAQ
Yes. Use the AQUOS TV REMOTE app on your Android device as a substitute remote for controlling Sharp Aquos TV.
Sharp Roku TV remotes without a pairing button are non-smart remotes, so they don’t need to be paired with the TV.
