Sometimes, the Sharp TV remote might not work even after replacing new batteries. Many of you may mistakenly assume the remote will no longer work and consider getting a replacement remote. Instead of doing that, you can reset the Sharp TV remote to fix the issue. The resetting process will take less than a minute and it will make the remote to work as before.
As we all know, Sharp TV has various operating systems, and resetting the TV remote also varies from each other. In this article, we have provided detailed instructions for the reset steps of all the Sharp remote models. Before resetting the Sharp TV remote, ensure that the batteries on the remote are not drained.
How to Reset Sharp Android TV remote
1. Open the battery compartment and remove the batteries from the Android TV remote.
2. Point the remote to the TV and hold down the Power button.
3. Now, insert the batteries into the remote while holding the power button.
4. Still, press the button until the LED starts to flicker.
Finally, you can start controlling your Sharp Android TV without fuss using the remote controller.
How to Reset Sharp Google TV remote
1. Grab the Sharp Google TV remote and remove the batteries.
2. Press and hold the Home button of the remote.
3. Concurrently, insert the batteries to the remote.
4. Long-press the Home button and release the button when the LED light starts flickering.
Your Sharp Google TV remote has been successfully reset. You can now use the remote to control your Sharp TV.
How to Reset Sharp Roku TV remote
If you use a Sharp Roku TV, you may have a Simple Remote or an Enhanced Voice Remote. The resetting procedure will vary depending on the remote type.
Roku Simple Remote
1. Eject the batteries from the Simple Remote.
2. Now, press the Power key and insert the batteries into the remote simultaneously.
3. Hold the Power button until the remote’s LED begins to pulsate.
That’s it. Your Roku Simple Remote has been reset.
Roku Voice Remote
1. Grab the Roku Voice Remote and remove the batteries.
2. Disconnect the power cord of the TV from the wall outlet.
3. Wait a few minutes and plug the power cord into the socket.
4. Power on your Sharp TV using the remote after inserting the batteries.
5. Long press the Pairing button on the remote, and a green light will flash.
6. Release the Pairing button when you completely see a green light flash.
7. Repeat the process now the Pairing Remote prompt will display on your TV screen.
Within a while, a reset prompt will appear that indicates the remote paired successfully.
How to Reset Sharp Aquos TV Remote
1. Remove the batteries from the TV remote.
2. Press and hold the Power button on the remote for 20 seconds.
3. Press every single button within the remote multiple times.
4. Once you are done, insert the batteries back into the remote.
Is Your Sharp TV Remote Doesn’t Work After Reset – Try these Fixes
Even after resetting the Sharp TV remote if the issue continues. Try the solutions below to fix it.
- The main reason the remote doesn’t work even after the reset is the poor battery power. Replace the old batteries with new ones.
- Sometimes, the problem might be with the Sharp TV, not the remote control. In this case, try the basic troubleshooting steps, like updating or rebooting the Sharp TV.
- If there is any damage to the Internal hardware parts of the remote, it might not work, no matter how hard you try to fix it. Contact the Sharp Customer Support team to fix the remote or buy a new one.
Frequently Asked Questions
The Sharp TV might not respond to the remote for many reasons, such as damaged IR receivers, signal obstructions, or firmware bugs.
You can try using Sharp TV replacement remote options to operate your device without a remote.
