Screws are necessary for wall mounting the Sharp TV to hold and lift the TV in a perfect balance. For mounting large-size TVs on brick walls, you need to use longer concrete screws. For lighter TVs, you can use shorter plastic wall anchors. In addition to that, you should check out the Sharp TV screw size parameters such as diameter and length. Finding the correct screw size depends on the VESA pattern of your Sharp TV.
Therefore, first, identify the VESA pattern of the TV and proceed with the wall mounting. Even with the mounting bracket, it is crucial to authenticate the screw size before installation. The VESA pattern can be located in the user manual or by measuring the mount holes on the TV. This article provides a guide to help you determine the correct screw size for wall mounting your Sharp TV.
Different Sizes of the Wall Mount Screws for Sharp TV
The screw size will differ according to the mounting bracket and your Sharp TV size. Here we have listed three different types of screw sizes you can use for wall-mounting Sharp TVs.
M4 Screws
These specifications are common in numerous devices using hexagonal fasteners, typically employed for assembling small LCD or LED TVs. The screw features a 4mm major diameter and a 0.7mm thread pitch. The M4 screw is capable of holding a TV that weighs less than 30 lbs.
M6 Screws
It refers to the 6 mm in the crest of the thread and 1mm in the thread pitch. M6 Screws are the universal screw size, which is more convenient for mounting. For medium-sized TVs, you can use an M6 screw which has a maximum payload of 213 kgf (2087 N).
M8 Screws
These types of screws are approximately comparable to a 5/16 bolt or screw. Most of the Shart TV are ideal with M8 screws and securely fix the TV to the wall. We recommend using a M8 screw size for wall mounting larger-sized TVs, and it has a load weighing limit of up to 225 lb.
Screws Required to Mount Sharp TV
We can’t abruptly fix the TV on the wall, so choosing the right screw size for the TV is always important. Refer to the table below to select the appropriate screw size based on your TV.
| Supported Screw Size | VESA Pattern | Sharp TV Screen Inch |
|---|---|---|
| M4 | 75×75 mm | 19-22 inches |
| M6 | 200×200 mm | 30-40 inches |
| M8 | 400×400 mm | 42-90 inches |
How to Find the Sharp TV VESA Pattern
First, you must know the Sharp TV’s VESA Pattern to get a suitable mounting bracket and screw-to-wall mount. The VESA pattern can be found in the user manual, or you can measure it manually.
1. Locate the Mounting Holes on the backside of the Sharp TV.
2. Calculate the distance between the horizontal two top mounting holes using tape.
3. Using the same tape, measure the vertical distance between the two mounting holes at the side.
4. Reversing the measured inches into millimeters (mm) will discover the VESA Pattern of your Sharp TV.
Frequently Asked Questions
What is the Sharp Aquos TV stand screw size?
The dimensions of the Sharp Aquos TV stand screw are 6.5 x 3.75 x 0.5 inches.
